Installing the Showerhead Pro is quick and easy with our installation guide
-
Remove your existing showerhead from the shower arm.
-
Clean the shower arm threads to remove any limescale or buildup. Wrap plumber’s tape around the threads clockwise 2–3 times.
-
Screw the Diamond Series onto the shower arm. Hand-tighten, then use the included wrench to snug it slightly—do not overtighten.
-
Apply plumber’s tape clockwise 2–3 times to the bottom threads of the Diamond Series.
-
Screw your existing showerhead onto the Pro Series.
-
Turn on the water and flush for 30 seconds before use.